Level Switch-Point Level Controls

Intellipoint RF^TM 

With Auto Verify Self Check, and SIL1 and 2 Certified. "perfect for overfill protection on floating roof , floating pan and fixed roof tanks"

IntellipointRF^TM is a versatile point level switch for liquids, slurries, granular and interface applications. Auto-calibration, Cote-Shield^TM is,auto-ranging power supply,dual compartment housing, relay-loop powered or device net outputs.

The Point^TM SAA certified level switch

ThePoint^TM level switch incorporates Drexelbrook's No Calibration technology into point level switch that requires no calibration or set point adjustments. The Point detects the presence or absence of liquids, slurries, interfaces and granular material

ZtronIII

Versatile Level switch is ex stock

for rapid delivery within Australia

ZtronIII^TM RF level switch offers an affordable and reliable level detection alternative to electro mechanical devices for a wide variety of applications. Drexelbrook's patented Cote-Shield circuitry allows Ztron III to ignore coatings and build up on the sensing element. They’re usually available ex stock.

Multipoint II

Multiple point switch using one sensing element.

Easy to use, multiple adjustable set-points.

Multipoint II level control is economical for processes requiring multiple operating points, such as batch processing and sump applications .The system provides four operating points with only 1 electronic unit to install and maintain. It requires only one opening in the vessel for the sensor.

The TF-100   Tuning Fork is piezoelectrically energized and vibrates at a frequency of approximately 1200hZ.  When the fork is covered in material, the frequency shifts.  The frequency shift is detected by the internal oscillator and converted into a switching command.